T CONDUIT BODIES
Copper-free aluminum die-cast
Combination threaded IMC or rigid and set screw EMT.
CATALOG
NUMBER		 UPC/DCI/NAED
MFG# 01 8997		 TRADE
SIZE		 UNIT
PKG		 STD
PKG		 DIM
A		 DIM
B		 DIM
C		 DIM
D		 DIM
E
9410T 94102 1/2 10 10 4.720 2.030 1.370 .200 .000
9411T 94112 3/4 10 10 5.570 2.335 1.625 .250 .000
9412T 94122 1 5 5 6.460 2.705 1.900 .250 .000
9413T 94132 1-1/4 2 10 10.828 3.630 2.770 .250 .325
9414T 94142 1-1/2 2 10 10.828 3.630 2.770 .250 .325
9415T 94152 2 2 2 10.812 3.980 3.335 .350 .350

Add suffix "CG" for aluminum cover and neoprene gasket, for example 9410TCG.

Threaded only for IMC or rigid, with aluminum cover and neoprene gasket.
946TCG 94627 2-1/2 1 1 13.500 4.060 5.825 --- ---
947TCG 94727 3 1 1 13.000 4.685 5.825 --- ---
948TCG 94827 3-1/2 1 1 15.937 5.450 7.060 --- ---
949TCG 94927 4 1 1 15.937 5.450 7.060 --- ---

Shown without cover and gasket.


E48106    LR49636

Combination T for rigid and EMT have threaded   interior for use with rigid; includes screws to use with EMT- Screws may be used for rigid, but are not necessary.--Listed rain tight  for rigid without the screws.- Can also be used for EMT to rigid.

Conduit Bodies Note: Combination T conduit bodies 1/2" through 2" now replace old design conduit  bodies eliminating the need to stock rigid and thin wall with no increase in cost. 

HUB ILLUSTRATION
For Combination Threaded and Set-Screw Conduit Bodies.

Combination threaded and set screw bodies are available in LB, T, LL, LR, and C configurations. They have combination hubs which are threaded for rigid and include set-screws for EMT. The  set-screws may be used for rigid, but are not necessary. They are listed raintight with rigid and concrete-tight for EMT. These products can also be used for EMT to rigid.

Shown with Rigid
Shown with EMT

 

.