BE1

New and Improved
Heavy-Duty Plastic
UL Listed
BOX EXTENDER
This device levels and supports the wiring device where the box is set back from the wall surface.
Extends the box up to 1-1/2".
CATALOG
NUMBER		 UPC/DCI/NAED
MFG #01 8997		 STD
PKG		 DIM
A		 DIM
B		 DIM
C
BEl 40160 25 2.313 4.188 1.813
BEl BAG 51905 1 per BAG
100 BAGS per BOX		 2.313 4.188 1.813
BE2 48960 25 4.100 4.188 1.813

(BEl BAG includes two #6 X 2" long screws.)

Patented. Additional Patent(s) Pending

BEl                         BE2


E170558   LR49636

BE1 INSTALLATION INSTRUCTIONS
Problem... Electrical box set back from wall surface.		 Warning: ALWAYS turn off power before installation.


1. Install
BEl Box Extender firmly into position.


2. Pass wires through Box Extender and attach to receptacle.


3. Tighten
screws for a level, supported, code compliant installation.
Note: To install without removing device wires, simply tilt the device through the BEl at a slight angle, then straighten and tighten screws!
FEATURES AND BENEFITS:
Allows the electrical contractor to comply with 2002 NEC Article 314-20.
Levels and supports the wiring device where the box is set back from the wall surface.
Works in handy boxes and 4" square electrical boxes with plaster rings for single switches or receptacle.
Functions with all standard devices, switches and GFCIs.
Manufactured from non-conductive, 105º C continuous use 94V0 rated flame retardant material for safer installations.
Adjusts up to a 1-1/2" box extension.
May be trimmed if necessary.

                      Cubic Inch Displacement

Spacing 1/4" 1/2" 3/4" 1" 1-1/4" 1-1/2"
Cubic Inch
Increase		 .412 1.512 2.612 3.712 4.812 5.912

 

.