Order #3838ST
Use #3838AST
for insulated throat fitting
The screw holds our 2-component connector together.
You won't need it for installation.
...especially in the time
saved in removing a second knock-out when you're wiring multiple light fixtures to a single switch.
Duplex SNAP2ITs fit (2) 14/2s to 10/3s...And Cost Less Than Steel duplex fittings! They're available with locknuts too, with or without the insulated throat.
 
The screw holds the 2-piece duplex SNAP2IT connector together.
No tools needed for installation!

SNAP2IT tangs hold MC cables
secure - with no chance of pullout
Screw holds connector components together
With SNAP-TITEÒ clip with or without insulated throat
Or with locknuts! with or without insulated throat
 
From light fixture or box... Slip screwdriver into SNAP-TITEÒ clip (figure1). Twist to remove clip (figures 2 and 3). Remove connector from knockout. Unscrew MC cables to remove them from connector.
For 3838ST, 3838AST, 3838, 3838A flexible.gif (3010 bytes)
Fits cables .405" (minimum) to .612" (maximum) diameter
Cable Type Cable Ranges
MC Cable Steel and Aluminum
14/2 12/2 10/2
14/3 12/3 10/3
14/4 12/4
AC Cable Steel and Aluminum
MC Cable
Continuous Corrugated Aluminum
14/4 12/2 10/2
12/3 10/3
12/4



Arlington's Home Page | Request A sample |  "What's New"


Arlington Industries, Inc.
800-233-4717.  FAX 570-562-0646.  1 STAUFFER INDUSTRIAL PARK.  SCRANTON, PA 18517