|
HERE'S THE
BIGGEST TIME-SAVER
AROUND |
It's our
Zero to 90 SNAP2IT
connector for AC, MC, 3/8" Flex
|
And it works like this...
|
the connector ships straight, but
adjusts to
ANY ANGLE
between 0°
and 90°
 |
#3890AST
for 14/2 to 10/2 |
|
#4090AST
for 12/2 w/ ground to 10/3 and 3/8" Flex |
 |
 |
 |
Snap cable into fitting until it
stops - Rotate cable clockwise to lock
|
 |
Loosen the nut to adjust angle of
fitting.
Wires bend automatically when the angle is adjusted
without crimping or damage to wire
|
 |
Tighten the nut.
Snap into k.o.
You're DONE in
about 8 seconds! |
Saves
more than a
FULL MINUTE
on every connector installed
over a locknut fitting
like this...
|
|
Patented. Additional Patent(s) Pending
 |
Cat. #850 |
|
