Contact Us: 1-800-233-4717 Find Arlington on Facebook Follow Arlington on Twitter Visting Arlington on YouTube Visting Arlington's Media Service

Two-Gang Low Profile IN BOX®

Part Number UPC Trade Size Unit Pkg Standard Pkg
DBVM2C 018997039620 2-Gang 1 4
DBVM2CGC 018997089908 2-Gang 1 4
DBVM2W 018997039637 2-Gang 1 4
DBVM2WGC 018997089915 2-Gang 1 4
DBVR2C 018997039644 2-Gang 1 4
DBVR2CGC 018997089960 2-Gang 1 4
DBVR2W 018997039651 2-Gang 1 4
DBVR2WGC 018997089977 2-Gang 1 4
DBVS2C 018997039606 2-Gang 1 4
DBVS2CGC 018997089984 2-Gang 1 4
DBVS2W 018997039613 2-Gang 1 4
DBVS2WGC 018997089991 2-Gang 1 4

Additional Information

Two-Gang IN BOX includes box with weatherproof in use extra duty cover; installed bug plugs; (1) decorator wall plate; and (2) NM cable connectors. DBVM2 also includes a block bushing with washer; and an in place, disposable mud cover. DBVR2 also includes (1) set installation screws; and (1) roll of caulk. DBVS2 also includes (1) set installation screws.

IN BOX's® one piece assembly replaces the installation of an electrical box and bubble cover assembly.

Installs in the wall, so less of it shows outside.

No gaskets required.

For flat surfaces, vinyl siding, stucco over masonry or wood (with or without lath), and retrofit.

Install an outlet and a switch, or two switches in one location.

Includes 1/2" and 3/4" NM cable connectors and a two-gang rectangular device plate.

Meets 2021 NEC section 406.9 (B) for the protection of exterior outlets where an extra duty weatherproof in use cover is required for 15 or 20 AMP receptacles installed outdoors.